"Remember it is new technology, especially for those who are used to the old box radios with knobs! So we need to be patience with one another on both side of the fence and try to understand SDRs together."
Well said, Ken. And those who do not understand the nuisances of SDRs fully yet need to be open minded, receptive and flexible with their expectations as the realities of this new technology are explored and explained by those who have gained the knowledge over the past few years. It is only a hobby. Have fun. Get on the air and operate! -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ken Danser Sent: Monday, April 26, 2010 7:48 AM To: [email protected] Subject: Re: [FlexEdge] Raspy audio Hello All, All statements that had been made in my opinion are some what understandable. Although Flex radio / PowerSDR has been around the block now for a bit, it is still consider new technology. A great new technology at that! In my opinion and from my experience, PowerSDR will have some conflicts from time to time because the code is always changing. I think some will experience more or less issues due to their particular setup. (computer hardware, computer software) If a user is using other software at the same time while using PWRSDR this will affect the CPU speed and in turn affect PWRSDR. Also other software that the end user is using could also have some bugs in it but will keep running as design but also could be affecting the hardware for a second or two in which it could affect the PWRSDR. Who cares and why I am saying all of this? I run a duel core 2.4 Intel cpu with two hard drive in a raid configuration for faster speed and a 1 gig video card with 4 gigs of memory on the motherboard. I have run my flex5000 remotely and in front of it! And I read all of these comments all of the time to keep up with the news! I run my Flex in the "Normal Mode" and I rarely, and I mean rarely have an issue. Now with that said, I do not run anything else on my computer while I am on the air. I am always shaking my head while I am reading these statements and saying to myself, I am glad I don't not have these issues. Remember it is new technology, especially for those who are used to the old box radios with knobs! So we need to be patience with one another on both side of the fence and try to understand SDRs together. This idea of SDR has been the best experience for me hands down. Sorry for the long message but my gut feeling lead me to speak out, and I rarely speak out here. One last comment. There are a lot of great people that come on here with a helping hand and this also includes those who have questions and issues because that is what makes this world of SDR a growing and a pleasurable learning opportunity! Thank you, Ken K3YI ----- Original Message ----- From: "Lazy Senior" <[email protected]> To: <[email protected]> Sent: Monday, April 26, 2010 6:42 AM Subject: Re: [FlexEdge] Raspy audio > Anytime you criticize Flexradio or PSDR you run the risk of of being > jumped on by the many defenders of Flex. > It will always be pointed out that you are the problem NOT Flex......... > > Stan K9IUQ > > > > Drax Felton wrote: >> >> Raspy audio: OK Subject dropped. I didn't intend to be a nuisance. >> >> >> Should I continue to report other bugs I find in Power SDR 2.x and the >> new >> drivers? >> >> >> >> Drax, KB3X >> >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software development and >> experimentalist who are using alpha and beta versions of the software. >> >> > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
