Yes, but not at the same time. -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Saturday, July 03, 2010 1:33 PM To: Don Sachnoff; [email protected] Subject: RE: [FlexEdge] flex 1500 2.0.5 issue
Are you also running a FLEX-5000/3000 on the same PC? -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Sachnoff Sent: Saturday, July 03, 2010 1:59 PM To: [email protected] Subject: [FlexEdge] flex 1500 2.0.5 issue Finally got everything up and running with the 1500...very nice and compact! I just updated to PSDR 2.0.5 from 2.0.3 and after initialization I got the following communications error: "Error communicating with radio ...... Please update the radio firmware to v2.0+ to prevent this issue......" The following have thrown exceptions: ...FWC.GetModel(UInt32& model) ...FWCEEPROM.Init() ...Console.ctor(String[] args) ...Console.Main(String[] args) I can go back and run v2.0.3 without issue. Don - kx9q _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
