Thanks Gerald. I'll do that and also upgrade to 2.0.5.
73,
Clay W7CE
----- Original Message -----
From: "Gerald Youngblood" <[email protected]>
To: "Clay W7CE" <[email protected]>
Cc: <[email protected]>
Sent: Sunday, July 04, 2010 5:38 PM
Subject: Re: [FlexEdge] Flex 1500 - transmit audio delay and distortion
Clay,
With regard to the audio, set the mic meter to peak at -20 dB. There is a
bug in the mic meter calibration that will be fixed soon. I have been
getting great signal reports with that setting.
Gerald
Gerald Youngblood, K5SDR
President and CEO
FlexRadio Systems(TM)
13091 Pond Springs Road, #250
Austin, TX 78729
Phone: 512-535-4713 Ext. 202
Email: [email protected]
Web: www.flex-radio.com
Tune In Excitement (TM)
PowerSDR(TM) is a trademark of FlexRadio Systems
On Sun, Jul 4, 2010 at 3:04 PM, Clay W7CE <[email protected]> wrote:
I've been playing with the 1500 on the air the last couple of days and
have
received several reports that the power level is very low for the first
second of so of transmission and then is fine. I did some experiments
looking at the Panadapter and can see the transmitted audio level rise
6-10
dB somewhere between 1/2 and 1 second after key down. Basically, to use
the
radio I have to key the mic and then wait 1 second before talking.
Anyone
else seeing this?
Also, some of the audio reports have not been very favorable. I worked a
JA station on 20M this morning and a CA station broke in to tell me that
the
audio was very distorted. The JA station agreed with him. The Mic level
was around -4 db at the time.
I'm running PSDR 2.0.2 from the CD that was delivered with the radio.
73,
Clay W7CE
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used
for posting topics related to SDR software development and
experimentalist
who are using alpha and beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
