I would think that if you had a antenna hooked up instead of a 50 ohm
load.. all the "spurs" you are seeing would be well below the band
noise. They are all very low level..
this is a spur problem
http://w9ray.org/sdr/spurs.htm
imho, what you are seeing is not.
Also remember this is Beta software.
w9Ray
[email protected] wrote:
Hello,
I am running a new 1500 with PowerSDR v2.0.5 Beta SVN 3783
I ran both the filter and level test.
The level tests all passed however i still see spurs (in the waterfall) across
all bands. See the following image:
http://moon-bounce.com/satcom/satcom_files/1500_spurs.jpg
The radio hooked up to a dummy load in this picture and during the filter/level
tests.
Any idea why I am seeing these spurs? I have several other SDRs running that
don't show spurs like this.
Also, in the filter test I had tests 4,5,8 and 11 all fail. Not sure if that is
meaningful or what to do about it.
thanks,
Joe Steinmetz
k6sat
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
