Are you sure the radio is transmitting RF or is just keying the device connected to the FlexWire?
-Tim From: David McKenzie [mailto:[email protected]] Sent: Sunday, August 08, 2010 11:46 AM To: Tim Ellison Cc: flexedge Subject: Re: [FlexEdge] Flex-1500 transmits at power on/off This is with 2.0.7 and firmware 0.4.1.4. The entire time between pushing the power button and the blue power light coming on, the rig is transmitting. I guess you could test this at home by putting an led between the voltage and the ptt ground on the flexwire connector (it keys the XMIT light on my transverters). On Sun, Aug 8, 2010 at 9:34 AM, Tim Ellison <[email protected]<mailto:[email protected]>> wrote: We need more information. What version of PowerSDR are you using? If not v2.0.7, you should upgrade as soon as possible. -Tim -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of David McKenzie Sent: Sunday, August 08, 2010 12:48 AM To: flexedge Subject: [FlexEdge] Flex-1500 transmits at power on/off Just wondering if this is normal intended behavior: My 1500 transmits for about 1 second immediately after being powered on (it also grounds PTT out on the FlexWire). I haven't checked how much power it is putting out but it's enough to move the needle on my IC-271 from S0 to 20 over. It also xmits for about 1/4 second at power down. _______________________________________________ Flexedge mailing list [email protected]<mailto:[email protected]> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
