I have entered both observations listed below as bug report as DE 301
in the developer's bug tracker. Thanks for the testing reports.
-Tim
---
W4TME
FlexRadio Systems Internet Systems Admin.
Product Verification Team
Tune In Excitement™
On 8/14/2010 8:09 AM, Jim Jannuzzo wrote:
I have this same delay with HRD DM780 and my 5K. I took DDUtil out of the
'circuit', to see if it was causing it. It wasn't. Same 5 second delay to
transmit, and 2 second delay ending transmit.
It's not just buffering, either: the first 5 seconds are being clipped. The
RSID warble is not being transmitted, even though the option is set.
Date: Fri, 13 Aug 2010 23:31:25 -0700
From: [email protected]
To: [email protected]
Subject: [FlexEdge] Flex 1500 and PSDR beta 2.0.8 TX delay
Don't know if this is new or not as I have just set up my Flex 1500 for TX
for the first time. When using fldigi through VAC and VSPmgr there is about
a 5 second delay after keying fldigi and output coming out of the F1.5k.
There is about a 2 second unkeying delay. Switching to SSB and using the
mic, TR switching is virtually instantaneous.
I ran the test again (also PSDR 2.0.8) using my F5K. No delay. Same fldigi,
VAC, and VSMmgr setup.
BTW, I use a separate com port pair through VSPmgr for PTT (keying DTR).
This is a fresh install with separate databases.
--
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
[email protected]
+1.767.617.1365 (Dominica)
+1.931.492.6776 (USA)
(+1.931.4.WB6RQN)
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
