Perhaps the play button should be disabled and only enabled when either PTT or MOX is engaged. Just my 2 cents...
Edwin Marzan AB2VW > Date: Fri, 3 Sep 2010 17:37:55 -0500 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [FlexEdge] Flexedge Digest, Vol 15, Issue 3 > > Nige, > > This is in the queue as DS5 for WBIR. It will be fixed before official > release of 2.0. > > Also, quick record/playback is intended for recording off the air and then > playback on the air. It is NOT the same as a wave file recording of the > receiver IF. The only valid way to use quick playback is to press MOX or > PTT first and then press quick play. If you do that, you will not confuse > WBIR. I have tested this myself. > > Regards, > Gerald > > > Gerald Youngblood, K5SDR > President and CEO > FlexRadio Systems(TM) > 13091 Pond Springs Road, #250 > Austin, TX 78729 > Phone: 512-535-4713 Ext. 202 > Email: [email protected] > Web: www.flex-radio.com > > Tune In Excitement (TM) > > PowerSDR(TM) is a trademark of FlexRadio Systems > > > On Fri, Sep 3, 2010 at 11:59 AM, Nige <[email protected]> wrote: > > > > > Been patiently waiting for some months for this to be fixed. It went wrong > > way back in the SVN's here and hasn't come back from the brink! Just noticed > > in 2.0.8 that the quick record/playback still behaves as per bug id 3120 but > > now with the added nicety of mirror panadapter images equi-distant from the > > 'carrier frequency' after the faulty playback stops or is terminated. > > > > Nige. > > > > ------------------------------ > > > > Message: 2 > > Date: Thu, 2 Sep 2010 17:18:04 -0500 > > From: "FlexRadio Support, Dudley Hurry" <[email protected]> > > To: John Vandenberg <[email protected]> > > Cc: [email protected] > > Subject: Re: [FlexEdge] Bug in Beta v2.0.8 > > Message-ID: > > <[email protected]<aanlktik6b4nyo3zipc8y8ii%[email protected]> > > > > > Content-Type: text/plain; charset=windows-1252 > > > > John, > > > > When you go to play back the Quick Record wav file in PowerSDR you will > > need > > to use either your PTT or MOX before pushing play, this will retransmit > > the > > file over the air. If you wish to just listen to it yourself, then drop > > the Drive level to "0" and then select either the PTT or MOX BEFORE > > pushing > > the Play button. > > > > > > 73, > > Dudley > > > > WA5QPZ > > FlexRadio Systems > > > > (512) 250-8595, Option 2 > > Email: [email protected] > > Web: www.flex-radio.com > > > > "Tune in excitement!" ? > > > > > > > > On Wed, Sep 1, 2010 at 5:48 PM, John Vandenberg < > > [email protected]> wrote: > > > > > After recording with the "Red button" the message displayed has an > > error: > > > > > > The file has been written to the following location: > > > C:\Users\john6\AppData\Roaming\FlexRadio Systems\PowerSDR > > > v2.0.8\\SDRQuickAudio.wav > > > > > > - Noticed the double backstroke. > > > > > > - Also if I hit the playback the display is screwed up and the sound > > > unintelligible. > > > > > > Question: > > > Were can I change the default location for for the wave file? > > > > > > John, ve3dvv > > > > > > > > _______________________________________________ > > Flexedge mailing list > > [email protected] > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > > for posting topics related to SDR software development and experimentalist > > who are using beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
