Dan, The RX image reject only comes up the first time if needed.. The one time optimization only comes up the first time on a new install. I take it that the black command window went through it's procedure, but the RX Image reject is the one that actually failed. You did not say which radio you have, but for the 3000/5000 here is the procedure.
Remove all antennas, if you have a dummy load, it would be good to connect to antenna 1. With the Console up, click start, then do a crtl + Shift + P on the keyboard, then in the Production Menu, click the RX Image button on the left side, let it complete all bands and write it's data to the EEPROM. Once the test is completed and written to the EEPROM, close the menu, and close down PowerSDR. Then you can restart. This should get you working correctly.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: [email protected] <[email protected]> Web: www.flexradio.com <http://www.flex-radio.com> <a href="http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank"><img border="0" src=" http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/></a> On Thu, Mar 10, 2011 at 9:44 AM, N7BHC <[email protected]> wrote: > I installed PowerSDR v2.0.20 RC2 this morning. The optimization procedure > stopped halfway through. I reran the installation and the optimization > routine did not come up at all. PowerSDR does run, but appears to have > problems with images that come and go as I tune around. I also have a very > strong carrier on 10MHz when no antenna is connected. I wonder if running > the optimization routine again would clear it up? > > Another thing I noticed is that tuning by thumbwheel with the cursor under > a digit in the VFO box is very jerky, quite often jumping 2 steps at a time. > TVersion 2.0.19 was very smooth. > > Dave N7BHC > > > > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
![http://www.crossloop.com/images/badge-sm-gray.jpg"](http://www.crossloop.com/images/badge-sm-gray.jpg"){kind=link}