Wow! Thanks! ________________________________________ From: [email protected] [[email protected]] on behalf of EB4APL [[email protected]] Sent: Friday, June 03, 2011 2:52 PM To: [email protected] Subject: Re: [FlexEdge] Off topic - PTS 160 xtal calibration
George, I don't have a PTS160 but my PTS040 is mechanically almost identical. On my unit, which has the overnized oscillator, the calibration screw can be easily accessed removing the top cover since it is in the top of the oscillator, not on its side as suggested by the hole below the Frequency Standard label in the back of the unit. Maybe this hole is for the TCXO equipped units. If you want a photo that shows the position of the screw (in fact the screw is a cover for keeping the oven closed, removing it you can access the actual tunning screw), just ask. In the photo you can also see the module arrangement in a unit with .1 Hz resolution so you can compare with your unit. 73 de Ignacio, EB4APL On 03/06/2011 19:59, George R Allen wrote: > Does anyone know how to calibrate the internal xtal standard within the PTS > 160? Mine is off by about 50HZ. I can use the Rubidium standard, that I use > for the F5K if necessary; but, would like the unit to be calibrated. > > > > Thanks > > > > George > > K2CM > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
