I'm having a similar same problem with RX2 in that it doesn't get any RF input on 6 meters when RX1 is tuned to any of my VHF+ bands (2, 1.25 and 0.7 meters). I've played with the Antenna Menu settings without any solution. Even setting RX1 = N/C and RX2 = Ant1 doesn't work! However, RX2 works normally when RX1 is also set to receive 6 meters (with all of the usual antenna combinations).
I do get a weak signal with RX2 on 6 meters when RX1 is on any of the other HF bands with the Antenna Menu set to RX1=ANT1 and RX2 = either ANT1 tap or RX2in but not RX1=N/C and RX2=ANT1!!!!!! BTW, the 6 meter antenna is connected to ANT1 and a dummy loads on ANT2 and RX2in. Why would RX1=N/C and RX2=RX2in work when RX2 is on 6 meters and RX1 is on any of the HF bands (with no HF antenna)??? This problem didn't occur before. I'm using v2.1.3 RC4 on W7-64bit quad AMD and an 5000A-V/U-ANT-RX2. 73, Jim K0MHC _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
