Dear FlexRadio customers:
FlexRadio is pleased to announce the new Official Release of PowerSDR(TM) v2.1.5 is now available for immediate download from our website. PowerSDR 2.1 adds significant feature and performance enhancements over the prior official release to all models including the FLEX-5000A, FLEX-5000C, FLEX-VU5K upgrades, FLEX-3000, FLEX-1500, and SDR-1000. We recommend that all customers upgrade to v2.1.5. The files can be downloaded at: PowerSDR v2.1.5 Integrated Installer / Setup Suite: http://support.flex-radio.com/Downloads.aspx?id=371 PowerSDR 2.1.5 Release Notes: http://support.flex-radio.com/Downloads.aspx?id=372 While the improvements are too numerous to detail, the following is a list of major changes since the previous official release, PowerSDR v2.0.22: 1. There is now an optional installation of the new FlexControl™ driver. Important: Please read the FlexControl Installation Errata Sheet regarding FlexControl use with Virtual Serial Port software. 2. FM has been completely redesigned including CTCSS tones, improved modulation/demodulation, soft limiting, FM squelch and more. 3. FM now has a dedicated Repeater Mode that allows you to set positive and negative offsets along with the frequency offset. Split mode is no longer needed to operate FM repeaters. For more information, refer to the KB article How to Use FM Repeater Mode ( http://kc.flexradio.com/KnowledgebaseArticle50501.aspx) 4. We've added a new and improved MEMORY form that integrates with the new FM Repeater Mode. For more information, refer to the KB article How to Use the Memory Form (http://kc.flexradio.com/KnowledgebaseArticle50500.aspx) 5. FM mode has a new mode specific control panel that allows you to select Memory channels from the console. 6. Full duplex when receiving on VFOA when transmitting on VFOB is now supported. Previously, full duplex was only supported when receiving on VFOB while transmitting on VFOA. This feature is usefule for SO2R on the FLEX-5000 and satellite cross-band duplex on the FLEX-5000 with FLEX-VU5K installed. 7. Added FLEX-5000 RX2 wave record/playback. 8. A Remove button (red X) is now provided on the Radio Chooser panel to allow easier radio start up maintenance. Thanks to so many of you who have continued to provide constructive feedback during the development process. We would like to express our special appreciation to our internal alpha/beta team for their tireless testing of internal releases. Enjoy, Greg -- Greg Jurrens - K5GJ VP, Sales and Marketing FlexRadio Systems _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
