Ted,
See my comments below.
-Tim
----
Tim Ellison, W4TME
Internet Systems Admin. & Customer Support Engineer
FlexRadio Systems^(TM)
4616 W Howard Ln Ste 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: [email protected] <mailto:[email protected]>
Web: www.flexradio.com <http://www.flexradio.com>
logo
/Tune In Excitement^(TM)
PowerSDR^(TM) is a trademark of FlexRadio Systems/
On 8/11/2011 10:06 PM, Ted Leonard wrote:
Hi folks.
I have gotten Ale to work on my 3K sort of at least, need advice of
those who have
been there done that.
I have set up a basic scan on 80-10M and I used tune in PSDR (latest)
to be sure I have a good match on all bands as I manually step through
them, however when I scan in PC-ALE it reverts to bypass.
That is the expected behavior for the FLEX-3000 ATU with the version of
PowerSDR you are using.
Since without the tuner I don't want to Tx I am unable to do
soundings. I thought the Flex would remember the settings for the
tuner and allow me to do this but either I am missing something
or the rig is not able to hold the settings in memory for scanning.
Currently there isn't an automatic memory function between band
changes. The next release of PowerSDR has enhancements to the FLEX-3000
ATU in that area.
My second question has to do with the relay click as it scans, I know
a feature has been built
into the SW to allow some dual VFO rigs to scan in split on the second
VFO without any band switching (relay switching) in Rx while
receiving-then if it has to TX it would switch to the other
VFO and allow the proper relay to switch in any needed filtering for TX.
Any thoughts, can it be done?
Not sure about that one. The the ALE software will do that for a
TS-2000, then you might be in business.
Thanks,
Ted W3VG
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
