Hello all.I have just built a transmit (only) converter for 137kHz with a 4MHz LO. I am receiving on VFO A on PA or XVRX at 137KHz with a band pass filter and trying to transmit on VFO B at 4.137MHz on XVTX/COM into the transverter. The TX and RX antennas are not the same.It will not transmit on the VFO B frequency on the transverter port. "Out of Band"It will work for VFO A on 4.137MHz on the XVTX/COM port with PTT and with the tune button.I tried setting up a transverter button with 4MHz LO but although PSDR displays the correct frequency there is no output at 4.137 on the XVTX/COM port when I key the transmitter.Is there something in the manual I am missing? Andrew(PSDR 2.2.2, W7, 32) _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
