Ted,
CWtype "keys" the Flex/PowerSDR Seconday Port via a Virtual Com port
Try this..
CWType SETUP:
All default settings except for the following:
CWType INTERFACE:
Key/PTT port type: COM port (via Windows API)
Key/ptt port number (here you'll need a virtual com port paired with Flex
radio PowerSDR)
((For example... Use COM 12 in CWtype and COM 13 in Flex Setup
Connection>Secondary))
Key/PTT ports pins:
Key=RTS
Power 1 = None
Power 2 = None
(be sure to click on apply and save when after making above changes in CW
Type)
CWType MOX & PADDLE:
Check enable MOX
Check TX on at keyboard if at least 1 character
Check Pause Off at TX off
(all others UNchecked)
Note: CWtype's open screen will have display TX RED (between Pause and
Beacon)
and should remain RED.
FLEX Power SDR setup:
DSP>KEYER
Secondary (virtual com port here...Example: Com 13)
Flex>DSP>Keyer>PTT line = DTR
Flex>DSP>Keyer>Key line = RTS
Break In Enabled
Mel, K0PFX
----- Original Message -----
From: "Ted Leonard" <[email protected]>
To: <[email protected]>
Sent: Sunday, February 05, 2012 5:40 PM
Subject: [FlexEdge] CW Get/CW Type With a Flex3000
I couldn't find anything in the Wiki, I sort of have Cw Get decoding but
unable to get CW Type to work. Can someone who has this running share their
settings.
Thanks,
Ted W3VG
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
