It is not possible to get the entire HF spectrum out of the FLEX-6000 for recording, but sections of HF will be possible.
Steve Stephen Hicks, N5AC, AAR6AM VP Engineering FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 x205 Email: [email protected]<https://mail.google.com/mail/mu/mp/732/?source=na&hr=1&hl=en> Web: www.flexradio.com *Tune In Excitement™* PowerSDR™ is a trademark of FlexRadio Systems On Monday, July 2, 2012, George Allen wrote: > > I see some endless possibilities with the 6000 series in recording an > entire spectrum up to 70MHZ. > > With the 6000 series, I wonder if there is the ability to transfer 70MHZ > (140MHZ of samples) worth of digitized data to hard disk or solid state > storage in real time. Is sufficient storage currently available to allow > this? > > If the transfer ability were available and if sufficient storage were > available, we could digitize the entire spectrum, save it, and process it > at a later time. > > Is there a capability in the 6000 series, along with SmartSDR, to save > large portions of the spectrum for later review? > > From my standpoint, if I were able to record an FMT, and > analyze/re-analyze the FMT signal after-the-fact, I would have a fighting > chance of getting some decent measurements. This could also be helpful in > analyzing intruders signals after the fact. If the ham bands were > digitized over a period of time, and someone detected an intruder, a bunch > of hams could analyze the signal at a later time. > > For long recording periods, I suspect that the amount of storage required > would be more than available in the "cloud"; but, it might be possible to > record for a few seconds. > > I can record a portion of the spectrum in the F5K and PowerSDR now; but, > not sure just how I can re-analyze a signal after the fact. > > Just a few musings from an inquisitive mind in upstate NY.... > > George > K2CM > > > > . > > > _______________________________________________ > Flexedge mailing list > [email protected] <javascript:;> > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > -- Steve Stephen Hicks, N5AC, AAR6AM VP Engineering FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 x205 Email: [email protected] Web: www.flexradio.com *Tune In Excitement™* PowerSDR™ is a trademark of FlexRadio Systems _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
