A little clearer but not quite: " You can define one panadapter with 4 slice receivers" Scenario: I have on the screen one panadapter (and waterfall?) AND may use up to 4 receivers that may be processing within (minimum 1) or outside of that panadapter range. i.e. Panadapter + 1 receiver within + 3 receivers outside or Panadapter + 2 receivers within + 2 receivers outside (etc. for 3 in and 1 out, and 4 inside the panadapter )
"or 4 panadapters with one slice receiver in each" Inference: A panadapter must have one receiver within which both drives the panadapter and may listen/digital process any frequency within that range. Or, looking at in a different direction: A receiver (up to 4/8 model dependent) may have an associated panadapter active/inactive. Where the associated panadapter does not use up one of the receivers Do I have it this time? Stan Williams VE3FLW -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim Ellison Sent: Thursday, August 02, 2012 11:06 AM To: [email protected] Subject: Re: [FlexEdge] Slice Receivers and panadapters You can define one panadapter with 4 slice receivers or 4 panadapters with one slice receiver in each (and all of the combinations in between) Tim Ellison On 8/2/2012 10:59 AM, Stan Williams wrote: > Reading the Flexinsider V1 I find this quote: > "Each of the four Slice Receivers and their respective panadapters on > the > 6500 can be tuned independently" > > > > > Each of the four Slice Receivers and their respective panadapters on > the > 6500 can be tuned independently > > > > > From earlier documentation I got the impression that a panadapter > used one of the (4) slice receivers but from this I get the impression > that there may be 4 receivers EACH with their own panadapter. > > > > Please clarify. > > > > Stan Williams > > VE3FLW > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
