I am hoping someone can spot what I did wrong here so I can get back to
normal. Yesterday night I was operating CW on 2m using the V/U module and
all was ok. Today, as far as I know, all I did was try to use the VAR
bandwidth option while in CW mode in order to get more than the standard 1
kHz during RCV. I needed this because the station I was working was
operating SSB while I was on CW. I also changed the Sample rate from 192k to
96k but don't rem if that was before or after the CW trouble started. I use
a quad-core desktop and XP with SP3. CPU usage hovers between 9-15%.
What several stations reported to me today is that when I send CW all they
hear is clicking. They could not find any tone above or below the carrier.
I can hear CW fine when I enable the MON. And, according to my external
wattmeter, normal pwr is being transmitted. I usually leave the CW offset
set to 650 Hz and stations use to be able to hear me fine. This is using my
external paddles or CWx. One station however reported that my signal starts
out with just clicking then after 5-10 seconds he can hear a tone.....too
weird !
Hoping someone can help, TU.
73 Gedas, W8BYA
Gallery at http://gedas.cc
Light travels faster than sound..
This is why some people appear bright until you hear them speak.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
