Hi Steve! Thanks for the quick reply.
I would like to see a FLEX-6000 accessory that would output control lines indicating Band Of Operation ( without going through a 3rd party PC based application ). I other words, I'd like to see an accessory that would provide an individual "pull to ground" output for each band, 160m, 80m, 60m, etc all the way through the VHF/UHF/microwave transverters. This would be used for controlling amplifier band selection, selecting antennas by band, selecting external transverters, etc. Hope something like that will become available with signaling provided by the Accessory Connector. 73 Lloyd - N9LB -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Stephen Hicks, N5AC Sent: Saturday, September 01, 2012 8:13 AM To: Lloyd Berg Cc: [email protected] Subject: Re: [FlexEdge] FLEX-6000 Accessory Connector We have not yet released a piece of equipment to connect to the accessory port, but providing frequency data or band data from the I2C port is a reasonable use for the port. Did you have an existing piece of hardware in mind that would be looking for I2C band data? Steve Stephen Hicks, N5AC, AAR6AM VP Engineering FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 x205 Email: [email protected] Web: www.flexradio.com Tune In Excitement™ PowerSDR™ is a trademark of FlexRadio Systems On Sat, Sep 1, 2012 at 7:24 AM, Lloyd Berg <[email protected]> wrote: I just received The Flex Insider - Issue 3... For the FLEX-6000 series, will the I2C data from the Accessory Connector support automating band selection for external amplifiers and transverters? 73 Lloyd - N9LB _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
