We're actually working on this now. Both are technically feasible. We are looking at the use cases for this, and some other things, and prioritizing what will be most useful to the most people first. We know that every operating position for the FLEX-6000 will need to have a FlexControl capability eventually. I should know more about the FlexControl in a week or two.
Steve On Friday, October 19, 2012, Ken Buser wrote: > Steve > > Can you tell us how the FlexControl will connect. > Will it use a USB Port on the PC Running Smart SDR, > and/or will it connect to one of the USB Ports on the Back of the 6000 ??? > > Ken W9IE > ----- Original Message ----- From: "Stephen Hicks, N5AC" < > [email protected]> > To: "Greg" <[email protected]> > Cc: <[email protected]>; "Lloyd Berg - N9LB" <[email protected]> > Sent: Friday, October 19, 2012 7:24 PM > Subject: Re: [FlexEdge] Computer requirements for 6000 series - Will Two > Ethernet Cards work? > > > In the FLEX-6000, the DSP is done in the radio. If you pull up a > panadapter, place a slice receiver on the display and start listening to > the audio, the computer is not involved in anything except commanding the > radio and displaying the panadapter. You can turn off your computing and > audio will continue playing out the radio. A big DPC hit might make your > display stutter, but it will not affect your audio. > > Steve > > Stephen Hicks, N5AC, AAR6AM > VP Engineering > FlexRadio Systems™ > 4616 W Howard Ln Ste <x-apple-data-detectors://1> 1-150 > Austin, TX 78728 <x-apple-data-detectors://2/0> > Phone: 512-535-4713 x205 > Email: [email protected] > Web: www.flexradio.com > Click Here for PGP Public > Key<https://sites.google.com/**a/flex-radio.com/pgp-public-**keys/n5ac<https://sites.google.com/a/flex-radio.com/pgp-public-keys/n5ac> > > > > > > *Tune In Excitement™* > PowerSDR™ is a trademark of FlexRadio Systems > > On Friday, October 19, 2012, Greg wrote: > > But shouldn't DPCs be much less an issue if at all with the 6000 series? >> >> Greg >> On Oct 19, 2012 2:12 PM, "Neal Campbell" <[email protected]<javascript:;>> >> wrote: >> >> > Absolutely! Windows is pretty good about handling more than 1 ethernet >> > device. >> > >> > Word of warning, get an Intel card. By all means, do not get a card > >> using >> > an Atheros chipset (yes, this will prompt hundreds of people swearing by >> > the excellent performance of their Atheros ethernet service on their >> > motherboard, but just take it from some who works on a lot of people's >> > computers that Atheros has the worst drivers out there. >> > >> > Second word of warning: Realtek chipsets can be okay but their drivers >> > seem to flip-flop on generating DPCs. For instance the very latest set >> > of >> > drivers from Realtek causes DPC spikes in the 300-600 us range. Just >> > falling back to the previous version restores its DPC good behavior. >> > >> > I will bet on Intel ethernet drivers more than any other brand I have >> > supported/installed. You can get a good card for 30-40 bucks, why take >> > chances! >> > >> > 73 >> > Neal K3NC >> > >> > On Oct 19, 2012, at 4:59 PM, Lloyd Berg - N9LB > <[email protected] >> <javascript:;> >> > >> > wrote: >> > >> > > Can ine simply put a second Ethernet card in the computer? >> > > ( I.E. One for Internet connection, the other one for FLEX connection? >> ) >> > > >> > > -----Original Message----- >> > > From: Flexedge [mailto:[email protected] > > >> <javascript:;>]On >> Behalf Of Tim >> > > Ellison >> > > Sent: Friday, October 19, 2012 7:21 AM >> > > To: [email protected] <javascript:;> >> > > Subject: Re: [FlexEdge] Computer requirements for 6000 series >> > > >> > > >> > > Michael is correct. SmartSDR-Win will put more stress on your graphics >> > > subsystem than PowerSDR, but don't don't go out and buy high-end 3D >> > > graphics card. Most recent GPUs will have enough horsepower. >> > > >> > > We are putting together the Quick Start Guide for the networking >> > > requirements. I recommend that you connect the FLEX-6x00 to a switched >> > > 100 Mb/s Ethernet port for best performance, your PC should also be >> > > connected that way as well. Most Internet routers, including >> > > thewireless ones, have switched Ethernet ports on them. Do be careful >> > > of very low-cost 10/100/1000 consumer Ethernet switches as they may >> > > radiate RFI when an Ethernet cable is connected to them, in which case >> > > you may need some mix 43 ferrite beads on the Ethernet cables to cut >> > > down on RF emissions from the switch itself. >> > > >> > > Speaking of Ethernet cables, CAT 5e or better is recommended. Do not >> > > use shielded twisted pair (STP) cables as this will create ground > > >> loops >> > > unless you cut off one end of the STP cable to break the shield, >> replace >> > > it with a plastic RJ45 connector and connected the shielded end to a >> > > well grounded FLEX-6000. >> > > >> > > How much client to radio (server) network bandwidth you will need will >> > > be dependent on the number of panadapters / active slices and the >> nature >> > > of the streamed audio for said slices. GigE will not be a >> requirementand >> > > you might be able to use 10BaseT with an 8-slice display, but you will >> > > be getting close to maxing out that bandwidth. One caution with >> > > wireless client connections; the bandwidth quoted for your wireless >> > > connection is the theoretical maximum and you will never achieve those >> > > throughput speeds in real world applications. Also the bandwidth > > >> quoted >> > > accounts for both the RX and TX paths, so you will need to divide your >> > > theoretical maximum bandwidth in half to get an idea of the actual >> > > bandwidth you are working with. >> > > >> > > Tim Ellison >> > > On 10/18/2012 3:59 PM, Michael Hasenfratz wrote: >> > >> That is my understanding. Although, good Ethernet and graphics card >> > should >> > > be in order. >> > >> >> > >> Michael Hasenfratz >> > >> ======================== >> > >> Light travels faster than sound. >> > >> This is why some people appear bright until you hear them speak. >> > >> >> > >> On Oct 18, 2012, at 9:27 AM, George Allen > >> < >> [email protected]<javascript:;> >> > >> > > wrote: >> > >> >> > >>> I presume that since the signal processing is done in the box of the >> > 6000 >> > > series, that there are no special computer requirements for the 6000 >> > series. >> > >>> >> > >>> Does anyone know if this is correct? >> > >>> >> > >>> George >> > >>> K2CM >> > >>> >> > >>> >> > >>> >> > >>> >> > >>> ______________________________**_________________ >> > >>> Flexedge mailing list >> > >>> [email protected] <javascript:;> >> > >>> http://mail.flex-radio.biz/**mailman/listinfo/flexedge_** >> flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> > >>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It >> is >> > > used for posting topics related to SDR software innovation and other >> > > technical SDR topics. >> > >>> >> > >> ______________________________**_________________ >> > >> Flexedge mailing list >> > >> [email protected] <javascript:;> >> > >> http://mail.flex-radio.biz/**mailman/listinfo/flexedge_** >> flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> > >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It >> > >> is >> > > used for posting topics related to SDR software innovation and other >> > > technical SDR topics. >> > > >> > > ______________________________**_________________ >> > > Flexedge mailing list >> > > [email protected] <javascript:;> >> > > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_** >> flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> > used >> > > for posting topics related to SDR software innovation and other >> technical >> > > SDR topics. >> > > No virus found in this incoming message. >> > > Checked by AVG - www.avg.com >> > > Version: 9.0.930 / Virus Database: 2441.1.1/5341 - Release Date: >> 10/19/12 >> > > 01:34:00 >> > > >> > > >> > > ______________________________**_________________ >> > > Flexedge mailing list >> > > [email protected] <javascript:;> >> > > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_** >> flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> > used for posting topics related to SDR software innovation and other >> > technical SDR topics. >> > >> > >> > ______________________________**_________________ >> > Flexedge mailing list >> > [email protected] <javascript:;> >> > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> > used for posting topics related to SDR software innovation and other >> > technical SDR topics. >> > >> ______________________________**_________________ >> Flexedge mailing list >> [email protected] <javascript:;> >> http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software innovation and other >> technical SDR topics. >> >> > > -- > > Steve > > Stephen Hicks, N5AC, AAR6AM > VP Engineering > FlexRadio Systems™ > 4616 W Howard Ln Ste 1-150 > Austin, TX 78728 > Phone: 512-535-4713 x205 > Email: [email protected] > Web: www.flexradio.com > Click Here for PGP Public > Key<https://sites.google.com/**a/flex-radio.com/pgp-public-**keys/n5ac<https://sites.google.com/a/flex-radio.com/pgp-public-keys/n5ac> > > > > > > *Tune In Excitement™* > PowerSDR™ is a trademark of FlexRadio Systems > ______________________________**_________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/**mailman/listinfo/flexedge_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz> > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software innovation and other > technical SDR topics. > > -- Steve Stephen Hicks, N5AC, AAR6AM VP Engineering FlexRadio Systems™ 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 x205 Email: [email protected] Web: www.flexradio.com Click Here for PGP Public Key<https://sites.google.com/a/flex-radio.com/pgp-public-keys/n5ac> *Tune In Excitement™* PowerSDR™ is a trademark of FlexRadio Systems _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
