SMOP
On 11/27/2012 9:04 AM, [email protected] wrote:
If I understand correctly from information regarding the Flex 6000; it
might be possible that SmartSDR will give the Flex 6000 the ability to
decide receive parameters that will raise or lower sensitivity depending
on band conditions (automatically). If the band is wide open with a high
noise level the Flex 6000 would attenuate the receive sensitivity to bring
the unwanted noise level down thus eliminating hearing fatigue. If the
band is not so good just the opposite would happen with raising
sensitivity. Of course this would be within the range of the receive
preamp / attenuate parameters. Would it be possible for the operator to be
able to define the noise level parameter(db) as this maybe different for
operator choice? Anyway, I am just pondering the vast possibilities.
73's
Joe
WD5Y
--
Sent from my Communicator
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software innovation and other technical SDR
topics.
