Mic Boost doesn't seem to be working on my new update. I get the same Mic
level reading whether it's on of off. I've had to advance Mic gain from 32 to
50+ to get good levels, and that is unusual. Is it just me?Jim KJ2P
> Date: Sun, 14 Apr 2013 23:10:42 -0400
> From: [email protected]
> To: [email protected]
> Subject: [FlexEdge] Announcing the general availability of PowerSDR v2.6.4
>
> To all FlexRadio Systems customers,
>
> FlexRadio Systems announces the general availability of PowerSDR^(TM)
> v2.6.4. This is a general availability release version intended for use
> with the FLEX-1500^(TM), FLEX-3000^(TM) and FLEX-5000^(TM) software
> defined radio transceivers. It contain bug fixes and new features, some
> of which are described below. A complete listing can be found in the
> release notes.
>
> ===================================
> Important Considerations before Installing PowerSDR v2.6.4
>
> This release of PowerSDR contains a new Firewire driver for the
> FLEX-5000 and FLEX-3000 SDRs and new firmware for all FLEX Series SDRs.
> It is highly recommended that you review the PowerSDR v2.6.4 Release
> Notes before installing to minimize any installation problems you may
> encounter.
>
> ===================================
> PowerSDR v2.6.4 Major Feature Highlights:
>
> A new and improved Firewire Driver for the FLEX-5000 and FLEX-3000 -
> This update is the most significant in the PowerSDR v2.4.6 release. The
> 4.1.1.17085 streaming Firewire driver fixes numerous defects and
> provides some additional performance improvements over the 4.0.0
> Firewire driver. A significant amount of development resources went
> into qualifying this new Firewire driver, as hardware drivers are
> foundational components of the PowerSDR / FLEX-5000 / FLEX-3000 radio
> "system". Due to the Firewire driver update included in this release,
> please make sure that you review the PowerSDR v2.6.4 Release Notes
> before installing. Specifically, how to use PowerSDR v2.4.4 or v2.5.3
> with the new driver. Also users of Windows XP systems will need to
> ensure that you manually install all three Firewire device drivers the
> first time you power up your FLEX-5000 or FLEX-3000 after the installer
> has rebooted your PC to complete the Firewire driver installation. The
> need for manually installing the FLEX Firewire driver is not required
> for Windows Vista and greater, as the Firewire device driver
> installation is completed automatically without manual intervention.
>
> New frequency allocations for EU countries - PowerSDR v2.6.4 allows
> users in the UK that have had their radios modified for 60m operation
> (requires a NOV and TURF software from your FlexRadio Dealer) to operate
> on the new 11 frequency segments in the 60m band. Swedish operators now
> have access to their 60m band segments (requires the radio to be TURFed
> for Sweden). Radios TURFed for operation in France, Italy and Russian
> have minor updates to their transmit frequency allocations. Please
> refer to the PowerSDR v2.6.4 Release Notes for additional information
> regarding the TURF software process for certain countries where transmit
> regulatory compliance is required.
>
> Additional Time & Frequency stations added to WWV bandstack, Easy
> frequency select for frequency calibration and a centered Panadapter for
> the FLEX-1500 - The CHU frequencies with their default mode have been
> added to the WWV band button (bandstack) to provide additional
> frequencies for the user to choose for frequency calibration purposes.
> To complement the new CHU additions, there is new a feature in the
> Frequency Calibration routine that will allow the user to select the
> current VFO-A frequency eliminating the need to manually enter it. Also
> included with this version of PowerSDR, the default display settings for
> the FLEX-1500 have been refactored so that the VFO-A carrier line is now
> better centered in the middle of the Panadapter rather than being skewed
> to the right hand side of the Panadapter so that equal amounts of
> spectrum above and below the VFO carrier frequency can be viewed.
>
> ===================================
> Where to get PowerSDR v2.6.4?
>
> PowerSDR v2.6.4 is available for download from the FlexRadio Systems web
> site.
>
> PowerSDR v2.6.4 Release Notes:
> http://support.flex-radio.com/Downloads.aspx?id=417
> PowerSDR v2.6..4 Integrated Installer:
> http://support.flex-radio.com/Downloads.aspx?id=416
>
> ===================================
> Getting Technical Support:
>
> If you encounter issues installing or operating PowerSDR v2.6.4 with
> FlexRadio's software defined radios, please contact FlexRadio Systems
> technical support by opening a HelpDesk support ticket on-line at
> http://helpdesk.flexradio.com
>
>
> -Tim
> --
> Tim Ellison, W4TME
> Product Management, Sales & Support
> FlexRadio Systems^(TM)
> 4616 W Howard Ln, Suite 1-150
> Austin, TX 78728
> Phone: 512-535-4713 Ext. 223
> Email: [email protected] <mailto:[email protected]>
> Web: www.flexradio.com <http://www.flexradio.com>
>
> logo
> _______________________________________________
> Flexedge mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
> for posting topics related to SDR software innovation and other technical SDR
> topics.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software innovation and other technical SDR
topics.
