I use a stereo 6.35mm plug for my Bencher iambic paddle. For a straight key use a mono plug as you say but then you'll have to set up the options:
Go to the setup menu, DSP tab,Keyer sub-tab and select radio and mono cable. That should work (though I'm not familiar with the CMOS-4 key). Phil G3UGK -----Original Message----- From: Flexedge [mailto:[email protected]] On Behalf Of paim Sent: 05 December 2013 10:34 To: c Subject: [FlexEdge] keyer cable info hi if i like to connect external keyer like CMOS-4 to the flex 5000 i need to run 6.3mm mono plug to the back of the 5000a yes ??? is this correct ? vy 73 E.P g0uut _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
