I assure you that it works, but probably just not in the way that you expect. The wave recorder will record the raw data samples as they are seen coming into the sound card (from the radio). This means 2 things: 1- The audio will be very low level (hence the need for AGC) and 2- the audio on RX will be at 11KHz.
For these reasons, if you playback the wave file on another application, you will likely just hear what sounds like nothing (due to #1) or a screeching around 11KHz (due to #2). Instead of playing these wave files back through another medium, the idea is to play them back through the PowerSDR software itself. Give it a try. It allows you to tune through the entire 48KHz of audio that was recorded. Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Jerry Harley > Sent: Tuesday, September 13, 2005 4:59 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] REcording > > I haven't seen anyone comment of this so I will ask. On the top of our > SDR display there are 3 choices, #3 is wave. If you bring it up you > have play back and record. Is this suppose to work? Mine doesn't Jerry > > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz