I think what Willi is saying is that if you set the CW Pitch to 1200, then strange things happen when using the Filter Shift control.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Bodo Scholz > Sent: Monday, November 07, 2005 2:57 PM > To: Willi Reppel > Cc: FlexRadio@flex-radio.biz > Subject: Re: [Flexradio] PowerSDR Beta v1.4.5 Preview 4 / Spectrum display > > Willi, > > here all works as it should, no observation of a shift of the center > frequency. > > The pitch of 600 Hz is also the center frequency in CW mode. Homing a > signal to 600 Hz, it stays there for filter settings. The audio presents > the filtered signal, but the displays shows always the pre-filtered data. > > Bodo > > > Willi Reppel schrieb: > > Bodo and Eric, > > > > I noticed also that the center frequency of the filter changes in > > version 1.4.5 Prev.4 from 600 to 1200 Hz when changing from 1kHz filter > > width to 500 Hz. This displacement of 600 Hz is also the setting for the > > pitch in my setup. So when homing in a signal to the center of the 1kHz > > filter it becomes inaudible when changing the filter width to 500 Hz. > > > > Willi > > > > > > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
