Thanks, Bob. This turned out to be the problem. The SDR1000 self-calibrates fine now.
73, Guy Sent wirelessly via BlackBerry from T-Mobile. -----Original Message----- From: "Bob Tracy" <[EMAIL PROTECTED]> Date: Tue, 3 Jan 2006 12:58:47 To:<[EMAIL PROTECTED]> Subject: RE: [Flexradio] Initial Frequency Calibration Troubles Guy, Check the Line In/Line Out connectors on the back of the SDR-1000, you may have them reversed. 73, Bob, K5KDN -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Guy Atkins Sent: Tuesday, January 03, 2006 12:53 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Initial Frequency Calibration Troubles During initial setup of my sdr1000 I'm getting a readout about 22 kHz high, and I'm having trouble correcting it through the auto Cal and the manual clock offset. Evidently this amount of readout error is beyond the adjustment range of both methods. Any suggestions as to what could be causing this? The soundcard here is the Firebox, with sampling rate set to 48,000 Hz. Thanks, Guy Atkins Sent wirelessly via BlackBerry from T-Mobile. _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
