Hi All, After a week of frustration, I hope there is some help out there. Everything on my brand-new SDR-1000 works EXCEPT the TX side:
1. With the setup EXACTLY as shown in the D44 Quick Start Guide, with H/W In 3/4 patched to WavOut 3/4, there is NO TX modulation. The Delta control panel shows plenty of MIC audio on H/W In 3, but nothing on H/W Out 3/4. 2. If I patch H/W In 3/4 directly to H/W Out 3/4 in the Patchbay/Router tab, I get modulated TX output, but I'm not so sure of the quality or the modulation. I have a feeling it's pretty gnarly (California term - HI). I'm using the built-in AC-97 sound module as the 2nd sound card via VAC. What am I missing or doing wrong that doesn't appear to be in the manual??? I also noticed that the Green LED on my RigRunner 13.8V DC buss flashes in sync with the display refresh rate. That's a bit odd. This rig has a lot of potential for me. Please help me prevent it from turning into an expensive paperweight. Tnx & 73, Dan KB5MY/6 DM13nc
