Have you tried connecting the microphone directly to the soundcard? (assuming that you are currently running it through the radio) Also, when did you purchase your radio? There was an ECO we added about a year ago where we changed the microphone front panel plug to avoid connecting the microphone shield to the enclosure ground. This was causing a ground loop as the true ground for the microphone should be at the connector on the soundcard. If plugging the microphone into the soundcard directly works, then you might check to see if this ECO has been performed.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: Marc Franco [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 17, 2006 3:52 PM > To: [EMAIL PROTECTED]; [email protected] > Subject: RE: [Flexradio] Question on TX echo > > Eric, and all who responded off the list, > > I do have the microphone and line input muted on > playback, so that's not it. As an experiment, I > un-muted the microphone, and boy, the echo was > horrible. I still wonder what it might be. > > 73, Marc N2UO > > > --- Eric Wachsmann - FlexRadio <[EMAIL PROTECTED]> > wrote: > > > Mark, > > > > Make sure that you have the mixer settings set > > correctly on the turtle > > beach. You will want to make sure that the > > microphone is muted on the > > playback side. This prevents the microphone from > > feeding back > > immediately into the output. This combined with the > > mixed/delayed > > output from the software will sound like an echo. > > > > > > Eric Wachsmann > > FlexRadio Systems > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com
