The short answer is that we don't know. We use VS.NET 2003 internally. I am not sure whether the 2002 version could be made to work or not. The easy thing to do would be to download our source and give it a shot. The source is available on our download page at www.flex-radio.com.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of N3EVL > Sent: Saturday, March 11, 2006 6:46 PM > To: [email protected] > Subject: [Flexradio] Finally place my order! + VS2002 Question... > > After following this reflector for over a year and messing about with wave > files and more recently with a softRock40, I finally took the plunge and > put > in my order today for the 100w rig + ATU + Delta44 (and also a nice power > supply from HRO). Needless to say, I can't wait for my unit to arrive. > The > guys on the local 2m repeater will no doubt be pleased that I finally put > my > money where my mouth is! I have been talking-up the radio quite a bit, > even > wrote an article for the newsletter a while back. > > I'd like to be able to build the source code and have seen the discussions > re build tools and some discussion of VS2003 vs VS2005. I currently have > VS2002 (this is also what I use at work) and was wondering if this is a > suitable build environment - I sucessfully use it for both C++ and C# but > haven't had an opportunity to upgrade to the later versions yet - any idea > if VS2002 will build the SDR DSP and console code? > > Pete, N3EVL > > > > _______________________________________________ > FlexRadio mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex- > radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com
