Hello Jeff and all, I reinstalled your console svn567 with new mdb file. Problem with the bypass-tune power is the same (only the first keying is ok). The problem with the TX-Monitor setting remains. But I found out, that it only appears when I set the TX-AF Monitor in the transmit setup to 10. Only when it is set to 10 ,as I usually do, the TX-AF is set to 50 after a restart of the console. Setting it to 11 works fine. This is only a small problem for me. Hope it's not a big one for you.
PS: I just discovered that this problem is not only in your version, Jeff . I just tried it with the original PowerSDR 1.6.2 and it is same strange behavior there. 73's Martin DL5YEJ ----- Original Message ----- From: "Jeff Anderson" <[EMAIL PROTECTED]> To: "Martin Hirsch" <[EMAIL PROTECTED]>; <flexRadio@flex-radio.biz> Sent: Tuesday, July 25, 2006 1:42 AM Subject: Re: [Flexradio] More info on Power bug > Thanks for the report, Martin. > > I can't replicate your problem here, but I may not be > following the same steps that you're taking when the > problem occurs for you. Could you please describe, in > greater detail, exactly what the problem is and when > it occurs? > > I'm assuming that you are refering to the Monitor TX > AF setting in the setup menu, is that correct? What > does it become in lieu of what you thought you had > stored? > > Also - you might want to try recreating the .mdb file > in the folder that contains my .exe file. Just rename > it something else (PowerSDR.mdb.backup, for example), > and relaunch my PowerSDR. When the Wizard (which will > appear if no .mdb file is found) asks you if you'd > like to import a previous database, SAY NO. Instead, > let the Wizard rebuild the database from scratch. > > This may not fix your problem, but it is worth a try. > > Best regards, > > - Jeff, K6JCA > > > --- Martin Hirsch <[EMAIL PROTECTED]> wrote: > >> Same tunepower behavior here with svn567 (8,July) as >> Duffy stated. But I >> discovered another bug: The Monitor-AF setting is >> not been stored when >> restarting the console. Sometimes (cannot fix the >> point when) it happens, >> that after a while the filter-section in the >> panadapter gets frozen but all >> other functions of console and sdr are ok. >> >> 73's Martin DL5YEJ >> >> ----- Original Message ----- >> From: "Duffy" <[EMAIL PROTECTED]> >> To: <FlexRadio@flex-radio.biz> >> Sent: Monday, July 24, 2006 8:16 PM >> Subject: [Flexradio] More info on Power bug >> >> >> > Apparently I didn't do a proper trouble shooting >> method (ie test all >> > permutations). All of the previously stated >> conditions exists if the >> > tuner is in bypass mode. If the tuner is in Memory >> or Full mode then the >> > tune pwr outputs 15Watts when tune is active and >> it doesn't matter what >> > is set in the setup file, it will only output 15 >> Watts in mem or full >> > tune mode for tuning ,no matter what the setup >> file reads.. The setup >> > file will change to whatever is on the xmit pwr >> out setting as I stated >> > before and it will use it in the bypass mode. >> *NOTE: I only found this >> > to be on the new K6JCA console dated 08 july 06 >> based on svn567 as I >> > stated before. *Duffy NA6MM >> > -------------- next part -------------- >> > An HTML attachment was scrubbed... >> > URL: >> > >> > /pipermail/flexradio_flex-radio.biz/attachments/20060724/d9ba85ff/attachment.html >> > _______________________________________________ >> > FlexRadio mailing list >> > FlexRadio@flex-radio.biz >> > >> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> > Archive Link: >> > http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> > FlexRadio Homepage: http://www.flex-radio.com >> >> > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
