Chas, Well I used split here now with HRD and it works much easier.
I was using the K6JCA console and it would not allow me to jump back easily to the DX Listening freq. If I did I have to reinput where I wanted to xmit. But using HRD I can toggle easily back and forth.. Thanks for the help. Scott -----Original Message----- From: Charles Greene [mailto:[EMAIL PROTECTED] Sent: Friday, August 18, 2006 9:26 AM To: Scott Gordon; [email protected] Subject: Re: [Flexradio] Working Split for first time Scott, This is the way I do it. Select split. That means you TX on B and receive on A. A is always to the left so you are always transmitting on the right vfo. Tune around until you see a pile up, filter on 1K. Equalize the vfos by A > B. Now tune in the DX station on A and set the filter to narrow, say 100 Hz so you can copy him. Shift to B by A <> B which is the vfo you are going to transmit on, B filter still on 1K. Find out where he is listening, where the competition is, and set the frequency where you are going to TX. Shift back to A by A <> B. When he signs, then TX. You will TX on B which has the wide filter and has your TX frequency. I can do this on my K2 using Carl N4PY's program. The K2 by itself will not associate filters with VFOs, but the SDR1k does. HRD I believe has adopted the same scheme, so you can also use HRD with the K2, or whatever. 73, Chas W1CG At 10:16 PM 8/17/2006, Scott Gordon wrote: >Man this took me forever to figure out and by the time I did the DX >station was gone.. > >Just doesn't seem easy but maybe I am going about this wrong? > >I tune VFO A to DX station then hit split then dial VFO B to where I >will transmit. > >Now if I needed to listen back on the freq where the DX is listening I >have to swap B to A > >But then have to start all over again to set up. WHICH IS NO FUN. > >I would rather see a VFO A and a VFO B be a single button that I could >toggle between and hit split to xmit on B vfo > > >Am I doing something wrong? > >Scott >KQ8RP >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: >/pipermail/flexradio_flex-radio.biz/attachments/20060817/f1667fcc/attac hment.html > >_______________________________________________ >FlexRadio mailing list >[email protected] >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
