At 08:28 AM 8/21/2006, Christopher T. Day wrote: >Alberto, > >You might take a look at the UM245R module from FTDI Chips. >http://www.ftdichip.com/Products/EvaluationKits/UM245R.htm > >It has a bit-bang mode that might do what you want and it's quite >inexpensive.
That is fairly nifty.. and cheap, too.. $20.. The DLP-Proto board on the next page (104) in the Mouser Catalog looks interesting too. >http://www.ftdichip.com/Documents/AppNotes/AN232R-01_FT232RBitBangModes. >pdf > >I have one sitting on my bench, but I haven't gotten around to doing >anything with it yet. > > > Chris - AE6VK > > >-----Original Message----- >From: Sami Aintila [mailto:[EMAIL PROTECTED] >Sent: Monday, August 21, 2006 3:44 AM >To: Alberto I2PHD >Cc: [email protected] >Subject: Re: [Flexradio] OT : USB <-> Parallel > >On 8/15/06, Alberto I2PHD <[EMAIL PROTECTED]> wrote: > > > > If someone has suggestions, please don't be shy... :-) > > > >Alberto, > >Commercial off-the-shelf devices are almost always only USB-to-printer >and not really USB-to-parallel adapters. Using them for anything else >than printing is very difficult and often impossible. > >However, the FlexRadio USB adapter could probably do what you need, >but it may require some additional software development. If you have >the Flex USB adapter, I could send you some code to test with your DDS >board. But if you don't have the Flex adapter, and would need to buy >one for this experiment, please understand that I can't promise it >will work! > >73, Sami OH2BFO > >_______________________________________________ >FlexRadio mailing list >[email protected] >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com > >_______________________________________________ >FlexRadio mailing list >[email protected] >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
