All, Just loaded SVN 671, and I am seeing a transient when initially keying the radio that produces a momentary RF output that spikes to roughly 43 Watts. My "PWR" is set for 40W, and I am using a foot switch to key the radio. I also see the spike when using the MOX button, and with the "Mic Gain" set at 0. I am using a Firebox for the audio interface. I also hear a loud resounding pop when transitioning from transmit back to receive. When the Firebox is disconnected from the radio, the symptoms go away. Is this what was being referred to in the "beware message" for Firebox users? The spike is not prevalent in V1.6.1 or V1.6.2, but the loud pop when transitioning from transmit to receive is.
Thank you, Mike W5CUL -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roland ETIENNE Sent: Sunday, September 10, 2006 6:29 AM To: [EMAIL PROTECTED]; flexradio@flex-radio.biz Subject: [Flexradio] svn 671 Hi Bob, I have seen your note on svn 671 version, beware of what? (I am using the Firebox, with good results, especially in CW....) 73, Roland f8chk. _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
