Thanks. Let's wait for the experts - they'll fix it. Jerry "A.R.S. - W5AMI" <[EMAIL PROTECTED]> wrote: I've noticed the same. Seems I can not control the mic level. When I think I've got it set where most all, if any audio exceeds 0dB, it will go full scale more often than not. Then I try reducing the mic level and it hangs way too low. At some point, on a previous version is the past, I did not notice this at all. I even use an external peak limiter on AM, and still the level is not controllable.
Brian On 9/16/06, Gerald Capodieci wrote: > I'm normally using 1.6.2 and the transmit audio is great. I tried 681 and > the mic audio sounds like a big impedance mis match. When I speak, low > levels are not picked up then when pick-up does occur the level goes to full > scale (over-driven). Mic boost is OFF. No other adjustments were made from > 1.6.2. > Jerry > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > /pipermail/flexradio_flex-radio.biz/attachments/20060916/44d6605e/attachment.html > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com > -- "There is nothing more uncommon than common sense." -- Frank Lloyd Wright -------------- next part -------------- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060916/469fbb6c/attachment.html _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
