If there's a Radio Shack nearby, they also sell
ground-loop isolators:

http://www.radioshack.com/product/index.jsp?productId=2062214

- Jeff, K6jca

--- "A.R.S. -  W5AMI" <[EMAIL PROTECTED]> wrote:

> Jon,
> 
> Do you have any stereo 1:1 audio isolation xfmrs
> laying around?  If
> so, try inserting one between your presonus
> connections and the
> line-in jack of the SDR-1000.  Make sure whatever
> xfmr you use, it has
> a good flat audio curve.  I use a Scosche car audio
> device:
> 
>
http://www.scosche.com/scosche_caraudio.aspx?CategoryID=33&ItemID=ES034
> 
> There are others like Jensen, Radio Shack, etc.
> 
> This may not help, however it will not hurt, and if
> you ever run AM
> with any outboard power, you might very likely need
> one, as there has
> been a reported problem with an DSB image 11kcs
> below the transmitting
> freq.  With this 1:1 isolation xfmr, that all goes
> away.
> 
> Brian w5ami
> 
> 
> On 9/27/06, K6JEK <[EMAIL PROTECTED]> wrote:
> > I started this thread about poor sideband
> suppression.   Just so you
> > all know, this is not a case of poor cable
> connections, an avenue I
> > diligently explored.   I do believe the stereo
> mini jacks leave
> > something to be desired but they are not the
> source of my opposite
> > sideband grunk
> >
> > Jon, K6EK
> >
> > On Sep 27, 2006, at 8:05 AM, Robert McGwier wrote:
> >
> > > I love Willi's practical approach to things.  I
> mean it is not as if we
> > > are attempting to preserve the beauty of this
> black box!  I did exactly
> > > this on a radio I was having trouble with doing
> a demo.   I do suspect
> > > that there are some who would feel uncomfortable
> removing the stack to
> > > drill the holes which is required to prevent
> damage to the connectors.
> > > But,  this allowed the cheapest plug to seat
> properly and deox removed
> > > the microOhm resistance oxidization build up (my
> stinking greasy
> > > fingers
> > > and their acid "reflux" ).
> > >
> > > Bob
> > > N4HY
> > >
> > >
> > > Willi Reppel wrote:
> > >> Jeff,
> > >>
> > >> One possible cure to avoid said jiggling and
> twisting of the plugs is
> > >> to
> > >> drill larger holes into the backplate of the
> SDR1000 enclosure. The
> > >> relatively small holes may prevent certain
> types of male plugs to
> > >> reach the
> > >> bottom of the female connectors. Gold-plated
> plugs here in the old
> > >> countries
> > >> have normally a larger diameter than the holes.
> Also, the holes in the
> > >> cabinet may not be con-centric with the rings
> of the female
> > >> connectors of
> > >> the board stack and the larger holes I drilled
> make sure that the
> > >> plugs are
> > >> properly seated. No more jiggling here since a
> long time ago.
> > >>
> > >> 73 es gl
> > >> SM6OMH  Willi
> > >>
> > >
> > > --
> > > AMSAT VP Engineering. Member: ARRL, AMSAT-DL,
> TAPR, Packrats,
> > > NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk
> Grp Chairman
> > > "You see, wire telegraph is a kind of a very,
> very long cat.
> > > You pull his tail in New York and his head is
> meowing in Los
> > > Angeles. Do you understand this? And radio
> operates exactly
> > > the same way: you send signals here, they
> receive them there.
> > > The only difference is that there is no cat." -
> Einstein
> > >
> > >
> > > _______________________________________________
> > > FlexRadio mailing list
> > > FlexRadio@flex-radio.biz
> > >
>
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > > Archive Link:
>
http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > > FlexRadio Homepage: http://www.flex-radio.com
> > >
> >
> >
> > _______________________________________________
> > FlexRadio mailing list
> > FlexRadio@flex-radio.biz
> >
>
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > Archive Link:
>
http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > FlexRadio Homepage: http://www.flex-radio.com
> >
> 
> 
> -- 
> "There is nothing more uncommon than common sense."
> -- Frank Lloyd Wright
> 
> _______________________________________________
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
>
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link:
>
http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Homepage: http://www.flex-radio.com
> 


_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Reply via email to