Jeff, I noticed that the headphone gain of the FireBox did not have any effect, so I turned the main gain control down and this time when I turned the headphone gain up, it had an worked. Now the pan controls worked fine. I tried turning stereo on and off, and the second time the console crashed.
Chas. At 08:45 AM 9/27/2006, you wrote: >Hi Charles, > >Do you have BIN On or Off when using the sub-receiver? > >In my testing, it seemed to me that the PAN controls seemed to work fine >when BIN was Off (admittedly, I was listening on speakers and not >headphones), but when BIN was On I lost the left/right seperation of the two >receivers. > >- Jeff, K6JCA > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Charles Greene >Sent: Wednesday, September 27, 2006 4:22 AM >To: Chris Gerber; flexradio@flex-radio.biz >Subject: Re: [Flexradio] Dual Receiver Slider Control > > >Chris, > >I am using a set of stereo headphones, and each ear has its own >volume control. If I tune in a CW signal in Sub receiver, it comes >in full volume in the right ear, but I can also hear it in the left >ear. Turning down the gain control on the right ear it is apparent >that there is very little attenuation between the left channel and >the right channel, if any. It is within the difference in gain of my >left and right ear :-) The slider is not doing the job. Using FireBox. > >Super filter control in SVN 692. Now I will change the band pass of >some adjacent filters to take advantage of 1 up or down. > >Chas, W1CG > >At 03:24 AM 9/27/2006, Chris Gerber wrote: > > >Hi Programmers > > > >With great pleasure am I using every new update on the SVN server. I > >love the Dual Reception. > >But now one question. Since years I am using Dual RX Transceivers, like > >FT1000D or > >others. They have only one slider (Control Knob) to choose either RX 1 > >or RX 2 audio. > >On the SVN version I am not able to adjust such with the two sliders. I > >always have a > >mix of both RX A and RX B. To really separate I need to use the Balance > >Control on > >my Speaker System. Why that? Is it not possible to add that to the > >Control Console? > > A second wish I have. On Jeffs K6JCA's program I have a fantastic > >Analog S-Meter > >I know its nostalic, but very usefull and I love it. Every new Cadilac > >or Mercedes TRX > >added that on their TFT Display. How about on the SDR? > > Otherwise thanks to all programmers for the good job they do!! > > > >73 Chris hb9bdm > > > > > > > > > > > > > > > >_______________________________________________ > >FlexRadio mailing list > >FlexRadio@flex-radio.biz > >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > >FlexRadio Homepage: http://www.flex-radio.com > > > >_______________________________________________ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com