Thanks for the suggestion Wally. I'm still concerned about overloading the front end of the rx if it doesn't go into a full standby. Even with the antenna changeover, a legal limit RF field can be quite strong for a nearby rx.
Eric, have you any comments on this? Thanks, Brian w5ami On 9/28/06, Wallace Watson <[EMAIL PROTECTED]> wrote: > Brian, > There is an input on the SDR-1000 X-2 auxiliary connector which is for > muting the receiver while transmitting with another transmitter or other > such optional operation. I am using this input to mute the receiver when I > use my foot switch to key another transceiver. > This is not designed to put the SDR-1000 into a full standby state but > mutes the receiver only so that when un-grounding this input the receiver > immediately returns to full panadapter display and receiver input. > I designed a small plug-in board which mates with the X-2 auxiliary > connector on the SDR-1000 which provides this input, an input for an > external foot or hand PPT switch and an optically-isolated FET driver for > switching a Linear Amplifier. > 73's, Wally - M0ZAZ. > > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
