> Eric,
> 
>   I can record fine.  But I no longer can playback.  
> 
> What I do is record then Add and before I hit Play I key with MOX then
> hit play and just get noise.
> 
> If I just hit play I hear what I recorded fine.
> 
> 
> 
> On Mon, 2006-10-16 at 12:42 -0500, Eric Wachsmann wrote:
> > Can you explain what part of it is no longer working?  We used Beta v1.6.3
> > at Pacificon this weekend, so I can say for sure that the playback is
> > working as intended.
> > 
> > 
> > Eric Wachsmann
> > FlexRadio Systems
> > 
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> > > radio.biz] On Behalf Of Scott
> > > Sent: Saturday, October 14, 2006 7:37 AM
> > > To: Flex Group
> > > Subject: [Flexradio] Record and Playback not working
> > > 
> > > I am running v1.6.3 beta and can no longer get this to work?
> > > 
> > >         Scott
> > >         KQ8RP
> > > 
> > >         -----Original Message-----
> > >         From: Eric Wachsmann [mailto:[EMAIL PROTECTED]
> > >         Sent: Wednesday, August 23, 2006 12:53 PM
> > >         To: 'Philip M. Lanese'; 'Scott Gordon'; FlexRadio@flex-radio.biz
> > >         Subject: RE: [Flexradio] Record & Playback on Air?
> > > 
> > > 
> > >         It is possible to use the existing wave record/playback features
> > >         in
> > >         PowerSDR to record a signal (yours or someone you are receiving)
> > >         and
> > >         then play it back later.
> > > 
> > >         If you are recording someone that you are receiving, set the
> > >         Wave Record
> > >         Options to record post-processed RX.  This will record what you
> > >         are
> > >         hearing (as opposed to the full IF).  Then when you are ready to
> > >         play it
> > >         back, simply add the file to the playlist, go into transmit
> > >         mode, and
> > >         then hit the play button.  Note that you may need to adjust the
> > >         MIC gain
> > >         to adjust the input volume from the wave file (typically wave
> > >         files need
> > >         much less gain due to the AGC that has already been applied to
> > >         the
> > >         received signal before you send it).
> > > 
> > >         For recording your own signal, you would want to select
> > >         pre-processed TX
> > >         signal on the Wave Options form.  This way, you would not run
> > >         the EQ,
> > >         filter, etc. twice (once before recording, once on playback).
> > >         Otherwise
> > >         the process is the same.
> > > 
> > >         Suggestions for how to improve this are welcome.
> > > 
> > > 
> > >         Eric Wachsmann
> > >         FlexRadio Systems
> > > 
> > > 
> > > _______________________________________________
> > > FlexRadio mailing list
> > > FlexRadio@flex-radio.biz
> > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > > FlexRadio Homepage: http://www.flex-radio.com
> > 
> > 
> > _______________________________________________
> > FlexRadio mailing list
> > FlexRadio@flex-radio.biz
> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > FlexRadio Homepage: http://www.flex-radio.com
> > 


_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com

Reply via email to