There is a good chance the card is not completely seated. Double check that the connection is even across the whole connector. Many times it will be the backside of the card (facing the front of the PC) that pops up just enough to cause problems.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of [EMAIL PROTECTED] > Sent: Monday, October 23, 2006 2:36 AM > To: flexradio@flex-radio.biz > Subject: [Flexradio] Delta 44 Driver Installation > > ZS6AVM Wrote: > > Having some strange problems re-installing the Delta 44 Drivers > I moved the sound card from one PCI slot to another (to make room for a > graphics card) > The reason I wanted to move the sound card was because the fan on the > graphics card was way to close to the sound card, and affecting the air > flow for the graphics card fan > Anyhow, I moved the sound card to the next PCI slot and the Delta 44 > would not work. I then tried to re-install the Delta Driver, and it > would not install > I tried a number of times without success > I moved the Sound Card back to the slot where it had been, and it still > did not work. I tried again to install the Delta Driver, and still no > success > As a last resort, I ran a System restore (back to a date two days > prior), and everything worked again > Does anyone know why I would be having this problem with installing the > Delta Driver ?? > > Any info would be appreciated > > Regards > > Dave > > ************************************************************************** > ***************************** > > Disclaimer: The information contained in this communication is > confidential and may be legally privileged. > > It is intended solely for the use of the individual or entity to whom it > is addressed and others authorised to receive it. > > Any review, retransmission, dissemination, copying, disclosure or other > use of, or taking of any action in reliance upon, this information by > person or entities other then the intended recipient is prohibited. > > If you have received this message in error, please notify the sender > immediately by e-mail, facsimile or telephone and return and/or destroy > the original message and all copies from any computer. > > > Denel (Pty) Ltd exercises no editorial control over e-mail messages > originating in the organisation and does not accept any responsibility for > either the contents of the message or any copyright laws that may have > been violated by the person sending this message. > > Denel (Pty) Ltd is neither liable for the proper and complete transmission > of the information contained in this communication nor any delay in its > receipt. > > This message should not be copied or used for any purpose other than > intended, nor should it be disclosed to any other person. > > ************************************************************************** > ***************************** > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: /pipermail/flexradio_flex- > radio.biz/attachments/20061023/a7c81fb0/attachment.html > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
