make sure that "Receive Only" isnt checked in setup....that happened tp me once
steve kw5tx Eric Wachsmann wrote: > Kevin (and list), > > > > Sorry to hear that you're having trouble and that I couldn't help you out > more quickly. There are a limited number of software options that could > cause this issue. So for starters, does the RX work OK? I take it that it > does as I haven't seen anything that suggests otherwise. This tells me that > the control side of things is setup properly and I trust that the audio > connectors are still in the original place. Do you get any power out when > you hit the TUN button? Try hitting TUN with the monitor (MON) off. If you > can still hear a tone, then that would suggest that the monitor and radio > output plugs are reversed at the soundcard. > > > > Beyond that, here are a few things to check: > > > > 1. Make sure the noise gate is off. > 2. Make sure VAC is turned off (disabled). > 3. Make sure that the MIC level is reasonable and that you can see > deflections on the TX Meter when it is in the Mic setting (if not, double > check your microphone/soundcard cabling). > 4. Check the Drive (output power) setting. > > > > That's all that I can think of at the moment. Give those things a try and > let me know what you find. We'll get you back online one way or another. > > > > > > Eric Wachsmann > > FlexRadio Systems > > > > _____ > > From: Kevin Gray [mailto:[EMAIL PROTECTED] > Sent: Friday, November 17, 2006 9:13 AM > To: [EMAIL PROTECTED] > Subject: SDR 1000 no transmit > > > > Eric: > > > > After multiple days of fussing with the microphone I got that working very > well. > > Rig was playing great Wednesday evening. > > Went through the shutdown procedure and shut everything down. > > > > Came back the following evening and turned the rig on. > > > > NO OUTPUT!!!!! > > > > I can hear the tone when in TUNE position and I can hear my voice on the > monitor. > > > > Items that I have already addressed. > > > > 1. All the cables have been taken out and reinstalled. > 2. Removed the parallel port and reconnected. > > 3. Shut the rig down and rebooted it as well as the rig > > 4. Tried to deinstall the software and reload it but it appears there is a > database that is not being deleted as it goes right back to the same > settings. > > > > All the guys on the reflector are saying it is time to talk with Eric. > > > > Thanks for your help. > > > > Kevin > > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > /pipermail/flexradio_flex-radio.biz/attachments/20061117/621520eb/attachment.html > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com > > > > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
