Ray, Do you have X2 relay turned on for amp keying? If so, what do you have the delay set to?
Greg AB7R -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ray Andrews Sent: Sunday, January 07, 2007 2:53 PM To: FlexRadio Systems email reflector Subject: Re: [Flexradio] Back-to-Basics Setup Question Ken, Thanks for the suggestions. I found that my external keyer (MFJ-401D) is not compatible with the COM port, either. So I connected my paddles & straight key direct to the COM port. I had been using the key jack on the back of the SDR-1000, and that would still be my preference. The CW setup article in the Knowledge Base as well as the SDR-1000 manual indicate that there is less latency if you use the COM port. I tried the COM port instead of the key jack because of a problem I had trying to use the key jack. However, the problem is still there. Using the CWX automatic keyer, the radio sends perfect code. However, if I try to send CW using either the paddles or the straight key, there is a very significant delay between key closure & transmit output. For example, if I set the code speed on the internal keyer to 15 wpm & send a string of 5 dits, the transmitter will not turn on until the 3rd dit, cutting off the 1st 2 dits. I confirmed this by watching my in-line power meter & by listening on another receiver. This occurs using either the rear panel jack or the COM port. What am I missing? 73, Ray, K9DUR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20 070107/cf92237a/attachment.html _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/