ZS6AVM Wrote: Many thanks to all those who responded to me directly with regards the above topic Last evening I installed SVN 879 Usually after installing a new SVN, I import the Database when prompted. With this SVN, I decided not to import the database, ran through the initial setup and launched PowerSDR. Once the SDR had run for a while I decided to try the RX Image Calibration (I use a XG1 for this , as well as the S Meter Cal) Whilst the Cal Routine was running I opened up the DSP Setup Menu, and the Image Reject sub-menu. This way I monitored with great interest the digits changing in the Phase and Gain Boxes Here it comes, the Phase clocked-out at 4.00, and the Gain at -3.55, which is a whole lot better than I was seeing in the past So all seems to be to my liking now, not that I fully understand wot the difference might be. Intuitively, the closer to 0 seems to make more sense to me. The further these figures are from 0, leads me to believe that there was some sort of problem Thanks again for all the help, and interesting posting Dave ZS6AVM
******************************************************************************************************* Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. ******************************************************************************************************* -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070206/ce4c0db3/attachment.html _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
