FlexWire does carry the audio, but it is on separate lines than the I2C.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Jim Lux > Sent: Monday, June 04, 2007 12:31 PM > To: Lee A Crocker; Jerry Flanders; Flexradio > Subject: [Flexradio] Flexwire carries audio? > > At 09:50 AM 6/4/2007, Lee A Crocker wrote: > >The flex wire is a 2 wire plus ground bus that can control eproms > >rotors switches potentiometers and other devices in a 2 way fashion > >and it can also carry audio I/O on the same 2 wires plus ground. It > >is not the same as a separate line level audio I/O. If you had a > >flex wire going up your tower you could theoretically work DX while > >you were at the top. The audio I/O on the 5K is also present > > > the flex-wire interface carries the audio, too? Seems incompatible > with a I2C style implementation > > Jim > > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
