> > > The preferred solution to this would be to provide a display offet freq for but DIGL and DIGU similar to the "Click Tune Offset" provided under the General>Options setup screen. An even better solution would be to tie this and other parameters to the TX Profile or create a "Mode Profile". I already use a RTTY TX Profile to set lower Drive and Tune power levels for the RTTY mode. > >
Not for me it isn't. Default behavior should turn off RIT and XIT and not try to deal with "standard" offsets that change by the mode and, sometimes, by the station worked. AFAIK, there is no common offset between the various digital modes. If so, what we have is the best available behavior for digil and digu. Not clearing RIT has cost me QSOs "in the heat of the battle." By all means, maybe a profile can override, but the default behavior should be agnostic towards shifts and reset both RIT and XIT on click and other frequency "main dial" moves. If there's a way to easily accomodate all modes, I'm all ears, but I cant think of an easy way to do it. Third party RTTY/PSK code must also work with whatever we do here. If it "sees" something different than we do, it isn't a clear improvement for those of us watching two waterfalls. Larry WO0Z _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
