It may be confusing as we have done it, but w9ol's problem is not caused by the equalizer.
The equalizer is left enabled on the form but in the CW, DIGL, DIGU, and DRM, it is simply not applied on TX or RX. This is easily seen in the code by looking at sdr.c and the routine do_tx_pre. In this routine, in the case of DIGL, DIGU, and DRM, the meters are calculated but the processing (leveler, equalizer, etc.) are NOT applied in the sdr. This was done to prevent having to remember to turn it back on. Bob Dudley Hurry wrote: > I'm not sure that it matters, since the microphone circuit is turned > off, and the EQ is for the mic. > > Dudley > WA5QPZ > > > > At 11:46 PM 7/24/2007, Robert McGwier wrote: >> The equalizers and lots of other processing are turned off in DIG? >> modes. Please report this as a bug after you have confirmed this is >> happening. >> >> Bob >> >> >> -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair "If you're going to be crazy, you have to get paid for it or else you're going to be locked up." Hunter S. Thompson _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
