I'm using the Firebox without the beta firmware. I have the sampling rate in the VAC 4.07 console set to 11025-48000, and the PowerSDR VAC sampling rate set at 12000. Will I be able to run that at 48K without upgrading the firmware? Thanks for any suggestions and help.
73... Jon W1MNK Dudley Hurry wrote: > Art, > > Another thing that might help which solved my dropouts is to bump the > audio sample rate (shows up in either "DIGL" or "DIGU" modes to > 48000. Also you might try "Real-Time" in the CPU Priority window. > > 73, > Dudley > WA5QPZ > > At 08:28 AM 7/27/2007, Tim Ellison wrote: > >> Art, >> >> The RX and TX threading is very different between the two versions. Make >> sure that a brand new DB is used for 1.9.1 (no imports) and you may have >> to increase the hardware (soundcard) buffer setting and or PowerSDR >> audio buffer settings to get it to work properly. >> >> -Tim >> ---- >> >> >> >> > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/