As some of you know, I accidentally put 5W in to my SDR's antenna port and hosed the receiver. I replaced the SGA-6286 IC, as well as the two protection diodes on the RFE board. However, it still isn't receiving. I have waited 5 weeks with the hopes of getting it serviced this week, and today was once again told it would be at least three to four weeks, minimum, before they might be able to get to it. While I love my SDR and agree that it is the best radio I've ever owned, I simply can not stick with a manufacturer that is unable to service their equipment in a reasonable time period. While I agree this is entirely my fault, the radio is less than a year old and still under warranty, and it troubles me to think that even if it had failed on it's own, I'd still be out a radio two months or longer waiting to get it serviced.
So with that being said, I'm willing to sell off the SDR in it's current state, or perhaps part it out. Everything else works fine, ATU still tunes, transmit still works great with full output on all bands, and sounds as good as it always has. If you are interested, please contact me with a reasonable offer. It's a standard SDR-1000, 100W PA, and ATU. I also have the Edirol FA-66 I will also no longer have a need for. I always like playing with new gear too, and I'm not opposed to trading off the hardware for another rig, or other radio related toys. I will sure miss my SDR-1000, but I need to get back on the air and doing what I love! 73, Scott, N5KRC -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070913/be16a64d/attachment.html _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
