You're correct Tim...I had not looked in a long time. Of course ARRL does measure both BDR and IMDDR3 down to 1 kHz spacings (in their Expanded Test Report) and publishes 2 kHz measurements in the QST reviews. So we may eventually know, but I would hope Flex will publish a spec on BDR at some point.
73, Bill W4ZV On 9/18/07, Tim Ellison <[EMAIL PROTECTED]> wrote: > If you look at his web site, you will see that he does not list BDR, so > I suspect it will not be published. > > -Tim > ---- > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bill Tippett > Sent: Tuesday, September 18, 2007 10:47 AM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] SDR-5000 - EHAM REVIEW - NEW SHERRIF IN TOWN > > > > "You will soon see the published numbers by Rob Sherwood on his website" > > He will also measure BDR at 2 kHz. What is the BDR spec > for the 5000 at 2 kHz spacing? > > 73, Bill W4ZV > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/