Neal, It's ok to jump back and forth. The catch is that you'll have to update firmware to the right version before PowerSDR will be happy if you do. SVNs past 1598 will use firmware v0.1.1.x. PowerSDR release v1.10.2 (and SVN revs 1598 and before) use firmware v0.1.0.2.
As Tim said, PowerSDR will help you out. If it is looking for one version and you have another installed, it will let you know. Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: Neal Campbell [mailto:[EMAIL PROTECTED] > Sent: Friday, September 21, 2007 2:42 PM > To: Eric Wachsmann > Cc: [email protected] > Subject: Re: [Flexradio] New FLEX-5000 Firmware released > > Sri! > > So we only update firmware when PowerSDR says to? > > I like playing, day to day, with the SVNs but will follow "FireBall" > (sri!) and use 10.2.1 in the rtty contest next weekend. So I should > just leave off the SVNs until I no longer want to use 10.2.1? > > 73 > Neal > > On 9/21/07, Eric Wachsmann <[EMAIL PROTECTED]> wrote: > > I believe you are referring to the FLEX-5000 Driver (currently > v3.0.0.70). > > This is different from the Firmware. The firmware is the actual > executable > > code that runs inside the FLEX-5000. The driver is the windows > interface > > that allows the FireWire to know how to talk to the hardware. > > > > > > Eric Wachsmann > > FlexRadio Systems > > > > > -----Original Message----- > > > From: Neal Campbell [mailto:[EMAIL PROTECTED] > > > Sent: Friday, September 21, 2007 1:09 PM > > > To: Eric Wachsmann > > > Cc: [email protected] > > > Subject: Re: [Flexradio] New FLEX-5000 Firmware released > > > > > > So if we are not using XVTR, should we stick with the 3.0.70 version? > > > > > > Neal > > > > > > On 9/21/07, Eric Wachsmann <[EMAIL PROTECTED]> wrote: > > > > FLEX-5000 Users: > > > > > > > > > > > > > > > > We have just released new firmware that addresses the issues with > using > > > > XVTRs. Using the XVTR setup form should now work as intended. Note > > > that > > > > the latest SVN (rev 1599+) will require that this new version of > > > firmware be > > > > loaded in order to run. > > > > > > > > > > > > > > > > To update your firmware, simply download the file from our website > at > > > > www.flex-radio.com <http://www.flex-radio.com/> (click on Download > > > > FLEX-5000 Firmware). Then unzip the file and run the burn.bat file. > If > > > you > > > > need more detailed instructions, there is a knowledge base article > that > > > > describes this process in detail at the following url: > > > > > > > > > > > > > > > > http://kb.flex-radio.com/article.aspx?id=10401 > > > > > > > > > > > > > > > > If you have any trouble, feel free to use the support mechanisms > > > available > > > > here and on our webpage (reflector, forums, phone support, email, > etc). > > > We > > > > will be happy to assist in getting things up and running for you. > > > > > > > > > > > > > > > > > > > > > > > > Eric Wachsmann > > > > > > > > FlexRadio Systems > > > > > > > > -------------- next part -------------- > > > > An HTML attachment was scrubbed... > > > > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex- > > > radio.biz/attachments/20070921/23de1748/attachment.html > > > > _______________________________________________ > > > > FlexRadio mailing list > > > > [email protected] > > > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > > > Archive Link: http://www.mail-archive.com/flexradio%40flex- > radio.biz/ > > > > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > > > > FlexRadio Homepage: http://www.flex-radio.com/ > > > > > > > > > > > > _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
