Jerry,

You need to review the VAC KB article again. It is very comprehensive.  VAC is 
used to route audio in and out of PowerSDR to third-party programs without 
having to use additional cables to make an interface.  vCom is just a serial 
port null modem emulator that will allow CAT commands only to be passed back 
and forth from PowerSDR to third-party programs.  vCom does not pass any audio 
signals.  That is the function of VAC

This KB article is specific to MixW, but the concept is the same for all 
soundcard program.
http://kb.flex-radio.com/article.aspx?id=10218



-Tim

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Harley
Sent: Friday, October 26, 2007 8:36 AM
To: J. Crit Harley, MD, C.Ht.; FlexRadio
Subject: Re: [Flexradio] ham radio deluxe

J. Crit Harley, MD, C.Ht. wrote:
> Jerry;
> Which waterfall are you talking about ... the one on the PowerSDR or
> the one in HDR and which part of HDR ... the PSK31 program or DM 780
> program?
> Are you using a separate snd card for HDR or VAC?
> If the HDR PSK31 program ... what are your sndcard IN and OUT set to?
> Etc. Etc
> 73/Crit/K4BXN
>
>
I'm just using VCOM to connect to HRD.  I have not purchased VAC.  I thought 
that if HRD was working with VCOM that I would be able to receive PSK and the 
others but not signal on PSK31.  I have 4 and 16 running HRD autodetect.

Yes to have I read all the knowledge base articles.  I didn't think the were of 
much help.  Jerry

_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: 
http://www.flex-radio.com/


_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Reply via email to