What happens when all of the devices start changing the state of PowerSDR and one device expects it to be in one state, but another CAT device changes it to something else. If it is PTT assertion, this could get very ugly.
-Tim ---- -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Amos Sent: Monday, November 26, 2007 2:04 PM To: [email protected] Subject: [Flexradio] Need another CAT input... Folks, I'm thinking about how to get multiple cat devices talking to the Flex. Here's my dilemma: I use a Palstar Autotuner connected to a com port to query the Flex for frequency information so that it can track my movement up and down the band. I'd also like to use a com port to send CAT commands to the Flex. Unfortunately, there's only one CAT input port in the PowerSDR software. For example, I use COM1 serial port to talk to the Palstar. I'd like to be able to use HRD to control the Flex. But with Palstar hooked up to the radio, I can't hook up HRD... I think the ideal situation would be to have a couple of CAT control inputs to PowerSDR. So, I'm looking for ideas to overcome this issue. Any thoughts? Mark W8XR _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/

